Battery Compartment Door
• Locate the battery compartment on the back of the base.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove
the battery compartment door.
• Insert three “C” (LR14)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer life.
• Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• When sounds or motions from this toy become faint or stop, it’s time for an adult to
change the batteries!
Shown Actual Size
1.5V x 3
"C" (LR14)
Shown Actual Size
Battery Installation
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The
batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information
