• Press both walls firmly toward the centre, to
"snap"
them together.
Assembly
5
6
7
Bottom View
• Lay the house assembly down so the bottom is facing you.
• Insert four #6 x 2 cm (
3
/
4
") screws into each base end to
secure the walls. Tighten the screws.
IMPORTANT:
Please be sure these eight screws are
fully tightened.
• Turn the house assembly upright.
Large Connector
Socket
• Position the house assembly so that the side with the radio is
facing you.
• Locate the large connector near the top.
• Insert and
"snap"
the large connector into the socket,
as shown.
PRESS
PRESS
#6 x 2 cm (
3
/
4
") Screw
4
4
• Insert the wall with the mailbox into the base assembly.
Mailbox