2
Battery Installation
1,5V x 4
AA (LR6)
• Locate the battery compartment door on the
top side of the hub.
• Loosen the screws in the battery compart-
ment door and remove the door.
• Insert four, new AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screws.
• If the hub begins to operate erratically, you
may need to reset the electronics. Remove
the batteries and reinstall them.
• When the lights become faint or stop, it’s
time for an adult to change the batteries.
• Open the fasteners on the tummy wedge and
remove the electronic unit.
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable.
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
