Fisher-Price FISHER-PRICE 73218 Assembly & Owners Manual Download

Page: 1 / 36

Harley-Davidson is a registered trademark
and the motorcycle sound is a trademark of
H-D Michigan, Inc. used under license.
Fisher-Price, Power Wheels by Fisher-Price and
Power Lock are U.S. trademarks of Mattel, Inc.

Owner's Manual

with Assembly Instructions

For Model 73218

Product features may vary from the picture above.

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver, Hammer and Safety Scissors (not included).

Use only with two Power Wheels

6 Volt Rechargeable Batteries with A-Style Connectors

and Built-in Thermal Fuses, and a Power Wheels

12 Volt Charger (all included).

Sound Box requires three “AA” (LR6) alkaline batteries (not included).

MOTORCYCLE

RIDE-ON

73218pr-0920.qrk 5/21/01 2:28 PM Page 1

Summary of Contents for FISHER-PRICE 73218





































Search results

Summary of Contents for FISHER-PRICE 73218

Reviews:

Related manuals for FISHER-PRICE 73218

Brands by name

Popular brands

Fisher-Price FISHER-PRICE 73218, Assembly & Owners Manual

Search results

Summary of Contents for FISHER-PRICE 73218

Reviews:

Related manuals for FISHER-PRICE 73218

Brands by name

Popular brands