• For longer life, use
alkaline
batteries.
• Open the fasteners on the back of the toy to
access the battery compartment.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver and remove
the door. Remove the batteries and properly
dispose of them.
• Insert three, new AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• Close the fasteners on the toy.
• If the toy begins to operate erratically you may
need to reset the electronics. Slide the power/
volume switch off and back on.
• When lights and sounds become faint or
stop, it’s time for an adult to change
the batteries.
Battery
Replacement
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable.
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 3
AA (LR6)
Battery Safety
Information