background image

• Open the fasteners on the bottom of the toy 

and remove the sound unit.

• Loosen the screw in the battery compartment 

door with a Phillips screwdriver. Remove 
the door.

• Remove the exhausted batteries and dispose 

of them properly.

• Insert two, new AAA (LR03) 

alkaline

 batteries. 

• Replace the battery compartment door and 

tighten the screw. Do not over-tighten.

Replace Batteries and Turn Power On

In exceptional circumstances, batteries may 
leak fluids that can cause a chemical burn 
injury or ruin your product. To avoid 
battery leakage:

• Do not mix old and new batteries or batteries 

of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the 

battery compartment.

• Remove batteries during long periods of 

non-use. Always remove exhausted batteries 
from the product. Dispose of batteries safely. 
Do not dispose of this product in a fire. The 
batteries inside may explode or leak.

• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent 

type, as recommended.

• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the 

product before charging.

• If removable, rechargeable batteries are 

used, they are only to be charged under 
adult supervision.

Battery Safety 

Information

What a Cuddle 

Monster! 

Care

• 

The toy is machine washable without the 
sound unit. Do not immerse sound unit.

• 

To remove the sound unit, open the 
fasteners on the bottom of the toy and 
pull to remove. 

• 

Machine wash this toy in cold water with 
a mild detergent on the gentle cycle. Do 
not use bleach. Tumble dry on low heat.

• 

Replace the sound unit back inside the 
toy. Open the fasteners on the bottom of 
the toy and fit the sound unit inside with 
the button facing the front of the toy. 
Close the fasteners. 

• Slide the power/volume switch, on the back 

of the electronics box, to ON with low 
volume  , ON with high volume 

 or 

OFF  .

• Replace the sound box back inside the toy. 

Make sure the button is facing the front of 
the toy.

• Close the fasteners.
• If this toy begins to operate erratically, you 

may need to reset the electronics. Slide the 
power/volume switch off and back on.

• When the sounds from this toy become faint 

or stop, it’s time for an adult to change 
the batteries. 

1,5V x 2

AAA (LR03)

• Pull monster’s arms back and forth or 

squeeze monster’s tummy (near the music 
note) for silly sounds.

• This toy enters sleep mode one minute after 

the last squeeze of tug. Squeeze monster’s 
tummy to wake it up.

• Protect the environment by not 

disposing of this product or any 
batteries with household waste. This 
symbol indicates that this product 
shall not be treated as household 
waste. Check your local authority for 
recycling advice and facilities.

For longer life, 

use 

alkaline

 batteries.

Summary of Contents for DYM88

Page 1: ...tion which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Consult the dealer or an experienced radio TV technician for help NOTE Changes or modifications not expressly approved by the manufact...

Page 2: ...tion What a Cuddle Monster Care The toy is machine washable without the sound unit Do not immerse sound unit To remove the sound unit open the fasteners on the bottom of the toy and pull to remove Machine wash this toy in cold water with a mild detergent on the gentle cycle Do not use bleach Tumble dry on low heat Replace the sound unit back inside the toy Open the fasteners on the bottom of the t...

Page 3: ...tion What a Cuddle Monster Care The toy is machine washable without the sound unit Do not immerse sound unit To remove the sound unit open the fasteners on the bottom of the toy and pull to remove Machine wash this toy in cold water with a mild detergent on the gentle cycle Do not use bleach Tumble dry on low heat Replace the sound unit back inside the toy Open the fasteners on the bottom of the t...

Page 4: ...tion which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Consult the dealer or an experienced radio TV technician for help NOTE Changes or modifications not expressly approved by the manufact...

Reviews: