Assembly
6
10
9
12
11
• Position the bracket so that the tall end is toward the
bottom edge of the seat.
• Fit the grooves on the bracket to the seat tubes, as shown.
Seat
Tubes
Bracket
Grooves
Tall
End
Lock Nut
Hexagonal
Opening
Shown Actual Size
M4 Lock Nut
Rounded Side
• Insert four M4 screws into the seat tubes
and tighten.
Bracket
Seat Tubes
M4 Screw - 4
Shown Actual Size
• Rotate the seat tubes down.
Seat
Tubes
• Fit the seat wire through the slot in the bracket as shown.
Seat Wire
Bracket Slot
Bottom
Edge of
Seat
Hint:
The M4 lock nuts have been assembled to the bracket at the
factory. During shipment of this product, they may have fallen out.
Check to be sure there is a lock nut in each hexagonal opening on
the bracket. If one (or more) has fallen out, fit the lock nut into a
hexagonal opening in the bracket. Make sure the rounded side of
the lock nut is facing up.
