31
IMPORTANT!
The mark made on your screen from the stylus and the location
of the tip of the stylus may not align. When this happens, you need to calibrate
the stylus.
• Turn Pixter® power on. Wait until you see the Home Screen.
• Turn Pixter over and locate the calibration hole.
• Insert, push and hold the stylus in the calibration hole. Turn Pixter over
so that you can see the screen.
• When you see two , remove the stylus from the calibration hole.
• First touch the
in the upper left corner with the tip of the stylus.
• Then, touch the in the lower right corner with the tip of the stylus.
Calibrating the Stylus