• While holding the cradle in place, insert a sleeve into
the outside hole in the foot of the cradle.
• Insert a 1
3
/
4
" screw with
1
/
2
" washer through the inside
hole in the foot of the cradle and into the basin. Hand-
tighten the screw.
• Tighten the screw in the foot of the cradle and the head-
board with a Phillips screwdriver. Do not over-tighten.
6
• Insert a sleeve into the inside hole in the headboard.
• Position the cradle so that the quilted side is toward
the basin.
• While holding the cradle in place, insert a 1
3
/
4
" screw
with
1
/
2
" washer through the outside hole in the head-
board and into the cradle. Hand-tighten the screw.
4
Assembly
Cradle
Basin
Headboard
Sleeve
Sleeve
Cradle
Basin
Screw
Cradle
Foot of
Cradle
Screw
Headboard
Basin
Quilted Side
5
• Check to be sure the cradle swings freely. If the cradle
does not swing freely, loosen the screw in the foot of
the cradle and the headboard
1
/
4
turn with a Phillips
screwdriver. Again, check to be sure the cradle swings
freely, and loosen if necessary.
Cradle
