background image

24

•  Your Power Wheels

®

 battery is a non-spillable, sealed lead-acid 

battery. It must be recycled or disposed of in an environmentally 
sound manner.

•  Do not dispose of a lead-acid battery in a fire. The battery may 

explode or leak.

•  Do not dispose of a lead-acid battery in your regular, household 

trash. The incineration, landfilling or mixing of sealed lead-acid 
batteries with household trash is prohibited by law in most areas.

•  Return an exhausted battery to a federal or state approved lead-acid 

battery recycler, such as a Power Wheels

®

 authorized service center 

or a local seller of automotive batteries. For the authorized service 
center location nearest to you, please visit us on-line at 

www.powerwheels.com

 or call 

1-800-348-0751

. Contact your 

local waste management officials for other information regarding 
the environmentally sound collection, recycling and disposal of 
lead-acid batteries. If you live in the State of Florida or the State of 
Minnesota, it is prohibited by law for anyone to throw away lead-acid 
batteries in the municipal waste stream.

Care

If a battery leak develops,

 avoid contact with the leaking acid and 

place the damaged battery in a plastic bag. See information below 
for proper disposal.

If acid comes in contact with skin or eyes,

 flush with cool water for 

at least 15 minutes and call a physician.

If acid is internally ingested,

 give water, milk of magnesia or egg 

whites immediately. Never give emetics or induce vomiting. Call 
a physician.
•  Charge a new battery for at least 18 hours before first use. 

Never charge the battery longer than 30 hours. Overcharging or 
undercharging the battery may shorten battery life and decrease 
vehicle running time.

•  After the first charge, recharge the battery for at least 14 hours 

after each use. Never charge the battery longer than 30 hours. 
Charge the battery after each use, regardless of how long the 
vehicle was used.

•  The battery must be upright while charging.
•  Do not allow the battery to run down completely before charging.
•  Charge the battery before storing the vehicle. 
•  Charge the battery at least once per month, even if the vehicle has 

not been used.

•  Leaving the battery in a discharged condition will ruin it.
•  Always remove an exhausted battery from the vehicle. Battery 

leakage and corrosion can damage the vehicle.

•  Do not store the battery on a surface (such as a kitchen counter 

top) which could be damaged by the acid contained inside the 
battery. Take precautions to protect the surface on which you store 
the battery.

•  Do not store the battery in temperatures above 75° F or below -10° F.
•  Use only a Power Wheels

®

 12 volt battery. Remember to charge the 

new battery for at least 18 hours before first use.

•  Prevent the battery from moving freely inside the battery compart-

ment.

 Always use the battery retainer to secure the battery in 

the battery compartment. 

•  Examine the battery, charger and their connectors for excessive 

wear or damage each time you charge the battery. If damage is 
detected, do not use the charger or the battery until you have 
replaced the worn or damaged part. 

Disposal

BATTERY CARE AND DISPOSAL

I

H0438pr-0920

Summary of Contents for CADILLAC Escalade Custom Edition





































Reviews: