Battery Installation
1.5V x 3
“AA” (LR6)
In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long periods
of non-use. Always remove
exhausted batteries from the product.
Dispose of batteries safely. Do not
dispose of product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removeable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery Safety
Information
Protect the environment by not
disposing of this product with
household waste. (2002/96/EC).
Check your local authority for
recycling advice and facilities.
• Locate the battery compartment
door on the bottom of the sleigh.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
If this toy begins to operate
•
erratically, you may need to reset
the electronics. Slide the power
switch off and back on.
• When sounds or lights from this toy
become faint or stop, it’s time for an
adult to change the batteries!
