Assembly
13
21
Note: If you have already charged your Power Wheels
®
6 Volt (4.0 Amp/Hr.) battery for at least 18 hours, you may
want to re-install it into the battery compartment before
assembling the seat to your vehicle. Please refer to the
Battery Installation section beginning on page 15 for
instructions.
• Insert the tab on the front of the seat into the slot in the
vehicle frame.
• Use a slotted screwdriver to rotate the lock fastener
1
/
4
turn to the locked position
.
• To unlock the lock fastener, use a slotted screwdriver
to rotate the lock fastener
1
/
4
turn to the unlocked
position
.
IMPORTANT! Remember to keep the lock fastener
locked at all times to prevent children from accessing
the vehicle battery.
Lock Fastener
Lock Fastener
LOCKED
UNLOCKED
Lock Fastener
Seat
• Fit the dipstick bubble wand into the hole in the vehicle
frame, near the seating area.
IMPORTANT! Please carefully read the owner’s
information in this manual and teach your child about
proper vehicle operation and rules for safe driving
before allowing operation of this vehicle.
22
Dipstick
Tab
