Fis
her-Price
®
Fis
her-P
rice
®
Fish
er-P
ric
e
®
Fis
her-P
rice
®
Fish
er-P
ric
e
®
• Lift the handle until it snaps into an upright position.
Note:
Make sure the tabs at the ends of the handle fit into the slots near the
rear wheels when the handle is raised. If the tabs do not fit into the slots, you
have not assembled the handle properly. Remove the handle and repeat assem-
bly steps
1
and
2
.
Handle
Hint: When using the mower with bubble solution, we recommend
using it outdoors on a flat surface or in short grass.
• Pour bubble solution into the mower spout. For refills, use commercial
bubble solution.
• Use the dipstick to check the bubble solution level and to blow bubbles, too!
• Bubbles begin flowing after the mower has been pushed about 15-20
walking steps. As long as the mower is being pushed, the bubbles continue.
• If your mower does not make bubbles:
- Check to be sure there is enough bubble solution in the mower.
- Empty the bubble solution from the mower. Refill the mower with fresh
bubble solution.
- Wash the bubble chamber (see “Let’s Clean-Up”), and refill with fresh
bubble solution.
Note:
We do not recommend the use of silicones or oily lubricants on this toy. As
with any bubble producing toy, when even a very small amount of silicone or oily
lubricants are put into or used near the bubble chamber,bubbles will not form.
ish
er
-
Fi
sh
er
-Pr
ice
®
Fis
he
r-Pri
ce
®
Dipstick
Spout
2
Assembly
Bubblin’ Fun!
