3
Assembly
• Insert a #8 x 2" screw into each of the pony’s feet
and tighten the screws.
• Turn the pony upright.
• While holding both rails in place, position the pony
upside down.
• Slide the rail supports into the matching slots in each rail
assembly as shown.
• While holding the rail in place, turn the pony over and fit the
other rail in place with the numbers 1 and 4 to the posts with
matching numbers 1 and 4.
• Lay the pony on it’s side so that it’s head is facing to the
left. Locate the numbers 2 and 3 inside the pony’s feet.
• Locate the rail with matching numbers 2 and 3.
• Fit this rail onto the posts inside the pony’s feet.
• Fit the tab on one rail half into the slot in the other.
• Insert a #8 x 1" screw into the rail assembly and tighten.
• Repeat this procedure to assemble the other rail.
2
2
3
4
Slot
Tab
Rail
Support
3
1
1
4
5
Posts
Posts
