• At an angle, insert the tabs on the seat into any of the top three
sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps into the
slots in the frame.
• Pull up on the seat to be sure it is secure.
Hint:
The seat can be attached to the frame in any of three positions,
depending on the size of your child. Check your child’s fit on the trike
by observing the seat to pedal distance, as it is being ridden. If the
pedals seem too far away or too close for your child, move the seat
up or down.
• Make sure the areas where the labels will be applied are clean and
dry. Wipe your vehicle with a clean, soft, dry cloth to remove any
dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label firmly with a cloth to make
sure the label is adhered to your vehicle.
Lower Position
Middle Position
Upper Position
Label Decoration
Attaching the Seat
6
16
(Label 15
opposite side)
10
(Label 10
opposite side)
23
(Label 14
opposite side)
17,18,19
(Labels 20,21,22
opposite side)
SIDE VIEW
DASH VIEW
2
3
4
5
1
6
7
(Label 9
opposite side)
13
8
Assembly
Tabs
Slots
Seat
Retainer
11
(Label 12
opposite side)