4
Stage 1
3
• Turn the board upright.
• Align the screws on the base of the handle
with the holes in the front of the board.
Hint:
The handle is designed to fi t on the
board one way. If it does not seem to fi t, turn it
around and try again.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
1
2
• Turn the board over so that the bottom is
facing you.
• While squeezing the levers behind the front
wheels, slide the wheels toward the edge of
the board.
• Release the levers. Pull on the wheels to be
sure they are secure.
• Adjust the wheels so that they are closer to
each end of the skateboard
• Attach the handle using the pre-assembled
screws in the base of the handle.
• While squeezing the levers behind the back
wheels, slide the wheels toward the edge of
the board.
• Release the levers. Pull on the wheels to be
sure they are secure.
