3
Adjusting the
Adjusting the
T
T
rucks
rucks
• Turn Wide Board
™
upside-down
on a flat surface. Locate both
trucks on each end of the board.
Hint:
Be sure to place a sheet
or towel on the surface to
protect it.
• Using an adjustable wrench:
- Turn each nut
clockwise
for a
stiff
setting.
- Turn each nut
counter-clock-
wise
for a
loose
setting.
Hint:
You should not need to
loosen the nut more than a few
turns for a loose setting.
IMPORTANT! Check to be
sure you have not loosened
the trucks too much!
Pull on
both trucks. The trucks should
remain on the board. If you can
remove either of them, you have
loosened the truck(s) too much.
Replace the truck(s) and tighten
the nut(s) clockwise with an
adjustable wrench.
The Wide Board
™
trucks are adjusted at the factory to the stiffest setting (for
beginner use). The stiff setting provides the greatest stability. As your child
becomes more comfortable and is better able to balance on Wide Board
™
,
you can adjust the trucks (to a loose setting) to allow greater steering control.
Counter-Clockwise
for Loose Setting
Truck
Clockwise for
Stiff Setting
