Assembly
5
• Place a scrap block of wood under the front
wheel assembly.
• Fit a pedal on the pedal axle. Tap the pedal with a
hammer until it is secure.
• Pull the pedal up to be sure it is secure. If you can
remove it, you have not secured it properly. Tap it with
the hammer again.
• Repeat this procedure to attach the other pedal to the
other end of the pedal axle.
Front Wheel
Assembly
Scrap Block
of Wood
Pedal Axle
Pedal
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the
bottom of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x
3
/
4
" screws into the fork cover
and tighten.
• Repeat this procedure to attach the other fork cover
to the other fork arm.
Fork Arms
Pedal Axle
Groove
Fork Cover
Front Wheel
Assembly
Fork Post
Fork Cover
• Insert the fork post up through the hole in the neck of
the frame. Make sure the fork is positioned so that the
fork covers face the rear wheels.
REAR OF
TRIKE
• Fit the handlebar front to the fork post.
Hint:
The handlebar front is designed to assemble to the
fork post one way.
• Fit the handlebar back to the fork post and handlebar
front. Hold them together firmly.
• First, insert the remaining #8 x
3
/
4
" screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2
1
/
4
" screw through the center
hole in the handlebar back and tighten.
Handlebar Front
3
/
4
" Screw
3
/
4
" Screw
2
1
/
4
" Screw
Handlebar Back
10
12
13
11
Fork Post
