4
1,5V
“D” (LR20)
+
–
1,5V x 3
“AA” (LR6)
+
–
• Loosen the screws in the battery compartment doors. Remove the
battery compartment doors.
• Insert one
“D” (LR20) alkaline
battery.
• Insert three
“AA” (LR6) alkaline
batteries.
• Replace the battery compartment door. Tighten the screws.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• If this product begins to operate erratically, you may need to reset
the electronics. Slide the mode/power off and then back on.
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
Battery Installation
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
