1,5V x 3
“AA” (LR6)
• Locate the battery compartment door on
the bottom of the train.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three “AA” (LR6)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries!
• If this toy begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and reinstall.
Battery Installation
Battery Safety
Information
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product.
To avoid battery leakage:
•
Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
•
Insert batteries as indicated inside the
battery compartment.
•
Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
•
Never short-circuit the battery terminals.
•
Use only batteries of the same or
equivalent type, as recommended.
•
Do not charge non-rechargeable batteries.
•
Remove rechargeable batteries from the
product before charging.
•
If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
