11
Batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of batteries in a fire.
The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are only
to be charged under adult supervision.
1.5V x 4
“D” (LR20)
(Swing)
1.5V x 3
“AA” (LR6)
(Lights 'n Sounds Tray)
ALL SHOWN ACTUAL SIZE
• Locate the battery compartment door on the bottom of
the lights ‘n sounds tray.
• Loosen the screw in the battery compartment door. Lift to
remove the battery compartment door.
• Insert three “AA” (LR6)
alkaline
batteries.
• Replace the battery compartment door and tighten
the screw.
Battery
Compartment
Door
Lights ‘n Sounds Tray
• Locate the battery compartment door on the back of
the remote.
• Loosen the screw in the battery compartment door. Lift to
remove the battery compartment door.
• Insert three “AAA” (LR03)
alkaline
batteries.
• Replace the battery compartment door and tighten
the screw.
Battery
Compartment
Door
Battery
Compartment
Remote
Remote
1.5V x 3
“AAA” (LR03)
(Remote)
Battery Safety Information
Battery Installation
