Assembly
4
• Open the base and position it upright on a flat surface,
as shown.
• Locate the end of the base with the mesh cover. Insert the
entire plastic mesh cover stay into one of the button holes
in the mesh cover.
• Be sure to tuck the plastic mesh cover stay away from the
button hole in the mesh cover.
IMPORTANT!
Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT
use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.
• Position the ends of the frame tubes against the
middle
holes in a frame.
1
3
Base
Mesh Cover
Button Hole
Plastic Mesh
Cover Stay
• Insert the metal canopy stay through the canopy tunnel.
• Insert an M6 x 1
5
/
8
" screw through each frame tube and into
the frame.
• Fit an M6 lock nut (with the rounded side toward the fabric)
into each
middle
, hexagonal opening on the back of the
frame.
2
Metal
Canopy
Stay
Canopy Tunnel
Frame Tubes
Middle Hole
Middle Hole
Frame
M6 Lock Nut
Push Base Up
Frame Tube
Frame Tube
Frame
M6 x 1
5
/
8
" Screw - 4
M6 Lock Nut - 4
Rounded
Side
4
Hint:
You may find it easier to access the hexagonal opening
on the back of the frame if you push the base up, so that the
fabric is out of the way.
