To tighten the belts:
• Feed the anchored end of the belt up through the buckle to form a loop
.
• Pull the free end of the belt strap
.
• Repeat this procedure to tighten the other belt strap.
To loosen the belts:
• Feed the free end of the belt up through the buckle to form a loop
. Enlarge the
loop by pulling on the end of the loop toward the buckle.
• Pull the anchored end of the belt strap to shorten the free end of the belt strap
.
• Repeat this procedure to loosen the other belt strap.
Please Note:
After adjusting the belts to fit your child, make sure you pull on them
to be sure they are securely fastened.
1122
S
S E
E T
T -- U
U P
P &
& U
U S
S E
E
Loosen
Tighten
B
Anchored End
Free End
Anchored End
Buckle
Free End
Buckle
B
2
2
3
3
Soothing Vibrations
• Make sure your child is properly secured in the seat.
• Slide the ON/OFF switch on the soothing unit to the ON position. The seat will vibrate.
• Slide the ON/OFF switch on the soothing unit to the OFF position. The seat will not vibrate.
IMPORTANT!
If vibrations from the soothing unit become faint, or if there are no vibrations,
remove the battery from the soothing unit and dispose of it properly. Replace the battery with a
new “D” (LR20) alkaline battery.
The pad is machine washable. Wash the pad separately in cold water on the gentle cycle.
Do not use bleach. Tumble dry separately on low heat and remove promptly. The frame, toy
bar, mirror, paddles and rings may be wiped clean using a mild cleaning solution and a damp
cloth. Do not immerse the soothing unit.
C
C A
A R
R E
E
79436pr-0920.qrk 9/22/00 11:01 AM Page 12
