Toddler Bed Assembly
• Stand the headboard assembly upright, as shown.
• Push down on the top of the headboard to secure it to the
right and left side panels.
Helpful Hint:
If you are having difficulty securing the
headboard to the left and right side panels, position the
assembly against a wall (with the molded moon, sun
and star toward the wall). Push down on the top of the
headboard to secure it to the left and right side panels.
• Turn the headboard assembly backward, as shown.
• Position the metal frame with the straight ends downward,
and the curved ends pointing forward, as shown.
• Insert the metal frame straight ends into the grooves in the
left and right side panels.
10
11
9
• Position the headboard on a flat surface with the molded
moon, sun and star facing up.
• Position the right side panel with the
R
facing the
headboard.
• Fit the pegs on the headboard into the slots in the right
side panel.
• Repeat this procedure to attach the left side panel to the
headboard.
Fish
er-P
rice
®
• Locate the holes in the metal frame, near the middle.
• Position a mattress retainer so that the arrow is pointing
up and is over the hole on the inside of the metal frame
assembly.
• Insert a barrel nut through the mattress retainer and into the
inside
of the metal frame.
• Insert a 1
1
/
4
" screw into the
outside
of the metal frame and
hand tighten the hardware.
• While holding the barrel nut in place with a Phillips screw-
driver, tighten the screw with the other Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to attach the other mattress retainer
to the other side of the metal frame.
8
Mattress Retainer
Headboard
Right Side Panel
Left Side Panel
Headboard
Left Side Panel
Right Side Panel
Metal
Frame
Headboard
Straight End
Groove
Right Side Panel
Left Side Panel
3
5
#10 – 24 x 1
1
/
4
" Screw
Shown Actual Size
Pegs
Slots
Metal Frame
