• Position the Adjustable High Chair seating side down.
• Rotate the leg assembly toward the seat back.
• Fit the retainers over the support tube and onto the seat
bottom pegs.
• Insert two
3
/
4
" screws into each retainer and tighten with a
Phillips screwdriver. Do not over-tighten.
Large Peg
Hole
• Position the Adjustable High Chair upright so that the front
faces you.
• Make sure the footrest support hangs freely, as shown.
• Insert the large peg on the footrest into the large hole in
the seat.
• Slide the small peg on the footrest into the small hole in
the seat.
Footrest
Support
Footrest
• Rotate the leg assembly toward the seat bottom.
• The support tube should rest in the groove in the seat bottom.
• Push the support tube and triangles all the way down to
the seat bottom.
Small Peg
Support Tube
Seat Bottom
Triangle
Groove
Seat Bottom
Support
Tube
Retainers
Support Tube
Triangle
Assembly
Seat Back
4
