-
+
SHOWN ACTUAL SIZE
1.5V
“D” (LR20)
• Lift the front of the pad to locate the small lower pocket.
• Lift the footrest wire with soothing unit.
• Fit the pad pocket onto the footrest wire with soothing unit.
• Lower the footrest wire with soothing unit.
Assembly is now complete.
Footrest Wire
with Soothing
Unit
Small Lower
Pocket
Assembly
Battery Installation
4
Loop
Loop
Helpful Hint:
Before assembling the lower portion of the
pad to the footrest wire with soothing unit, you may want
to install the battery in the soothing unit. Please see the next
section (Battery Installation) for instructions.
6
Battery
Compartment
Door
• Insert a coin into the the battery compartment door and pry
the battery compartment door open.
• Insert one size “D” (LR20) alkaline battery, as indicated inside
the battery compartment. Be sure to place the battery on top
of the ribbon.
Helpful Hint:
For easy battery removal, simply lift the ribbon.
• Replace the battery compartment door and be sure it snaps
securely closed.
• Fit the pad onto the footrest wire with soothing unit.
• Lower the footrest wire with soothing unit.
PLEASE NOTE:
• Remove the battery during long periods of non-use. Never
leave a worn-out battery in this product. Battery leakage
and corrosion may damage the this product. Dispose of the
battery safetly.
• Do not attempt to recharge a non-rechargeable battery.
• Remove the rechargeable battery from this product
before recharging.
• Charging of a rechargeable battery should only be done under
adult supervision.
• Avoid short-circuiting the terminals of the battery.
• Remove the exhausted battery from this product.
Battery Installation
• Lift the footrest wire with soothing unit.
• Remove the pad from the footrest wire with soothing unit.
Footrest Wire
with Soothing
Unit
Pad
• This product requires one, size "D" (LR20) alkaline battery.
