Tool Time!
• With the workshop surface face up, slide the table top
over the tray area from the back of the workshop. Make
sure the table top slides under the table top supports.
The dual-sided table top adjusts to two positions:
workshop surface or drafting table.
Table Top Supports
Table Top
• To convert the workshop surface to a sloped drafting
table, flip the table top over and place the edge of the
table top in the groove in the tray.
• Lay the sides of the table top on the table top supports
on the legs.
Table Top
Groove
• Hang the wrench, pliers and screwdriver in the toolholder.
• Hang the hacksaw, hammer and adjustable wrench
from the tool hooks under the top shelf.
• Hang the stencils from the stencil hooks on the legs.
• Arrange the nuts, bolts, and nails on the top shelf.
• Store the blocks of “wood” in the storage bucket on the
side of the All-In-One Workshop, or in the tray area.
• The storage bucket can be attached to either workshop
leg, and can be easily moved from one leg to the other!
• Turn the vise handle clockwise to close the vise.
• Turn the vise handle counter-clockwise to open the vise.
• Hang your carpentry plans from the paper holder for
quick and easy reference. Simply slide the edge of your
paper under the paper holder.
• Keep your miscellaneous supplies in the tray area
under the tabletop.
If you have any questions about this product:
In Canada,
call
1-800-567-7724
, or
write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain
, telephone 01734 770488.
In Australia
, call the Fisher-Price
Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to:
Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne,
Victoria 3207.
©1996 Fisher-Price, Inc., East Aurora, New York 14052
77171 1 77171-0920
Back View
Workshop Surface
Back View
Sloped Drafting Table
To
Open
To
Close
