Heel Brake Wear
Heel Brake Wear
The wheels and heel brake are
replaceable with Fisher-Price
®
parts only!
If you would like to order a wheel
replacement kit(s) or a brake replace-
ment kit, or have any questions
regarding this product, please call
Fisher-Price
®
Consumer Affairs at
1-800-432-KIDS
, 8 AM-5 PM EST
Monday through Friday.
Hearing-impaired consumers using
TTY/TDD equipment, please call
1-800-382-7470. Or, write to:
Fisher-Price
®
Consumer Affairs
636 Girard Avenue
East Aurora, New York 14052
Wheel Rotation
Wheel Rotation
Replacement Parts
Replacement Parts
If you have any questions about this product:
In Canada,
call
1-800-567-7724
, or write to:
Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
In Great Britain
, telephone 01628 500303.
In Australia
, Mattel Australia Pty. Ltd.,
658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service
1-800-800-812 (valid only in Australia).
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
©1998 Mattel, Inc. All Rights Reserved.
® and
TM
designate U.S. trademarks of Mattel, Inc.
Printed in Mexico
77115pr-0920
Worn Wheel
New Wheel
Proper care and maintenance
is important!
Over time, and with-
out rotation, the wheels will wear
unevenly on the inside edge.
When this happens, it’s time to
rotate the wheels.
Proper care and maintenance is
important!
Over time, the heel
brake will wear down. If the heel
brake is worn, it’s time to replace it!
Please call Fisher-Price
®
Consumer
Affairs at
1-800-432-KIDS
for
replacement information.
• Using a 4mm Allen wrench, loosen
and remove the bolt and nut in
each wheel. Remove each wheel,
keeping in mind its original location.
• Turn the wheel around so that the
worn edge is now on the outside.
Now, replace each wheel in the
skate, one position back from where
it originally was placed. For example,
the first wheel should be replaced
in the second position; the second
wheel should be replaced in the third
position; and the last wheel should
be replaced in the first position.
• Replace the nut and bolt in each
wheel and tighten with a 4mm Allen
wrench. Do not over-tighten.
3
2
1
New Brake
Worn Brake
