background image

®

6

Securing Your Child

To Tighten

To Loosen

Release
Lever

Anchored End

Buckle

Free End

Crotch
Belt

Restraint
Bar

Waist
Belt

• Pull the release lever toward you and raise the 

restraint bar.

• Unbuckle the waist belts from the crotch belt.

• Place your child in the swing.

• Pull the crotch belt up between your child’s legs and

fasten both waist belts to the crotch belt. Make sure 
you hear a “snap” on both ends.

• Insert the restraint bar down into the latch until it snaps

into place. Pull up on the restraint bar to be sure it is
securely latched.

To tighten the waist belts:

• Feed the anchored end of the waist belt up through

the buckle to form a loop   . Pull the free end of the
waist belt    .

• Repeat this procedure to tighten the other waist belt.

To loosen the waist belts:

• Feed the free end of the waist belt up through the

buckle to form a loop    . Enlarge the loop by pulling
on the end of the loop toward the buckle.

• Pull the anchored end of the waist belt to shorten the

free end of the waist belt    .

• Repeat this procedure to loosen the other waist belt.

Free End

Anchored End

A

B

A

B

A

B

A

B

®

Summary of Contents for 75973









Reviews: