background image

• Make sure the shifter is in the 

LOW SPEED position.

• Press the foot pedal. The vehicle will drive forward at a

maximum of 2

1

/

2

mph.

• Help your child practice steering to learn how far and

how quickly to turn the handlebar when driving forward
in low speed.

• Your vehicle has a patented, electronic braking system

that automatically stops the vehicle when your child’s
foot is lifted from the pedal.

• Make sure your child is comfortable with steering the

vehicle and automatically knows how to stop.

Beginner - Low Speed Drive

IMPORTANT! To avoid damaging the motors and
gears, make sure to stop the vehicle before
switching from forward to reverse
.

• Move the shifter to the REVERSE position.

• Press the foot pedal. The vehicle backs-up at a

maximum of 2

1

/

2

mph.

• Help your child practice steering to learn how far 

and how quickly to turn the handlebar when driving 
in reverse.

REMOVE LOCK-OUT

SCREW ON SIDE
OF SHIFTER FOR

HIGH SPEED
OPERATION

REMOVE LOCK-OUT

SCREW ON SIDE
OF SHIFTER FOR

HIGH SPEED
OPERATION

Shifter

Shifter

How to Operate Your Vehicle

L

As assembled, your vehicle is ready to roll in low speed (2

1

/

2

mph, maximum). When your

child is ready to drive the vehicle in high speed (5 mph, maximum), follow the instructions
(step 3) to disconnect the high speed lock-out.

Reverse

20

Hint: Once your child is comfortable operating the vehicle
forward, introduce reverse.

Advanced - High Speed Drive

Before you disconnect the high speed lock-out, make
sure your child knows how to start and stop the vehicle
and knows the rules for safe driving. When the high speed
lock-out is removed, the vehicle can be driven forward in
low speed (2

1

/

2

mph, maximum) or high speed (5 mph,

maximum).

• Remove the lock-out screw from the shifter box using a

Phillips screwdriver. Store the screw in the hole in the
shifter for future use. You can re-insert the screw into the
shifter box if you want to lock-out high speed and allow
operation of the vehicle in low speed only.

REMOVE LOCK-OUT

SCREW ON SIDE
OF SHIFTER FOR

HIGH SPEED
OPERATION

Lock-Out
Screw

Shifter

1

3

2

Summary of Contents for 73690





























Reviews: