Sound Effects Mode
Choose any one of three sound effects: babbling brook,
chirping crickets or tweeting birds. The sound effect will play
for approximately 10 minutes. There is no light display in the
Sound Effects mode.
• Press the button on the soother or the remote to play the
first sound effect. To skip to a different sound effect, press
the button to stop the first sound effect. Press the button
again to start the second sound effect. Keep pressing the
button to cycle through the three sound effects.
• When the selected sound effect ends, the receiver
remains active and will blink for up to four hours. Press
the button on the soother or the remote to restart the same
sound effect. After approximately four hours without
activation, the receiver times-out and will stop blinking.
Press the heart button on the soother to replay the
selected sound effect and reactivate the remote. Or, to
reactivate the remote without replaying the sound effect,
move the mode switch.
• Always turn the mode switch to the OFF position (
) when
the soother is not in use.
• Do not leave the remote face down or in a drawer or toy
box. Light pressure on the remote button can activate the
remote and drain the batteries.
• To clean, wipe the surface of the soother and remote with a
damp cloth. Do not immerse the soother or remote.
Slumbertime Soother with Remote Control
Model Number: 71249
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Fisher-Price, Inc.
Consumer Affairs Department
636 Girard Avenue
East Aurora, New York 14052
Care
FCC Note (United States Only)
9
