• Touch the ‘Options’ button repeatedly to select between ‘Wrinkle Free’ and ‘Eco’.
Wrinkle Free
We recommend you remove the clothes from the washer immediately after the completion of the
cycle to minimise wrinkling and creasing of items and to prevent dye run. However, if you will not
be present at the end of the wash you can select ‘Wrinkle Free’.
When ‘Wrinkle Free’ is selected, the washer will tumble the clothes once every 15 minutes for up to 12 hours after the
cycle has finished. The ‘Wrinkle Free’ light and
button will flash, and the washer will beep at regular intervals to remind you to remove your load. To remove the load
during this phase, touch the
button.
Eco
Use the ‘Eco’ option to save water and energy. Selecting ‘Eco’ will reduce the wash temperature slightly and alter the
wash and rinse programming.
‘Eco’ cannot be selected after a wash cycle has been started, ie if you touch
and try to select ‘Eco’ it will be unavailable. ‘Eco’ must be selected before the cycle starts. This
option will not be available if ‘Rinse+’ has been selected.
• If you wish to, you can select both ‘Wash Boost’ options of ‘Pre Wash’ and ‘Rinse+’ to perform
on the same cycle. Likewise, you can select ‘Eco’ and ‘Wrinkle Free’ to perform on the same
cycle. Touch the appropriate button until both options are selected. Repeat to deselect an option.
• For clothes care and performance reasons not all options are available on all cycles.
Updated: Tue, 16 Nov 2021 12:17:21 GMT
Powered by
5
