Fisher & Paykel Soft Touch electronic, User Manual, Page: 5 / 16

3
Clock and timer
Setting the clock
To set the clock, press the
CLOCK
button, and then press the
HOURS
and
MINUTES
buttons until the
clock shows the correct time.
You can choose between 12 or 24 hour clock displays. To do this, press and hold down the
CLOCK
button and
CLEAR
button at the same time. Each time these buttons are pressed together the clock
alternates between 12 and 24 hour displays.
Using the timer
You can use the timer at any time, even when the oven is not in use. The timer does not turn the
oven off.
To set the timer, press the
MINUTE TIMER
button, then the
HOURS
and
MINUTES
buttons to set the
time you want. The display will show the remaining time, counting down in minutes and seconds.
To see the time of day while the timer is running, press
CLOCK
. The display will briefly show the time
of day, then return to showing the countdown of time remaining.
When the time is up, the timer will beep and
TIMER
will flash in the display. To turn it off, press any
clock button.
To cancel the timer at any time, press
CLEAR
.
Limiting the number of ‘beeps’
You can limit the number of times your oven beeps to five beeps. To do this, press the
CLOCK
and
FUNCTION
buttons together. Do the same again to return to a longer beep time of approximately
five minutes.
Fig.1 Electronic Soft Touch control panel and clock