27
Dimensions apply for the preparation and installation of Custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
z
The thickness of the custom door panel can vary provided that the screws do not penetrate beyond the full depth of the door panel.
CUSTOM DOOR PANEL INSTALL DIMENSIONS
76CM REFRIGERATOR-FREEZER
TOP DOOR PANEL
76CM REFRIGERATOR-FREEZER
DRAWER PANEL
Ensure handle is
mounted 65mm from
edge of panel to the
centre — this will avoid
interference with bracket.
Ø 2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Ø 2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Cutouts in the hanging
bracket are applicable for
Fisher and Paykel handles only.
If locating a custom handle in
the shaded area shown above,
ensure handle screw heads are
countersunk into the back of the
door panel to avoid interference
with the hanging bracket.
377.8mm
203.2mm
50.8mm
32.6mm
50mm
12
7mm
50
7.8mm
109
2mm
50mm
50mm
1254mm
20mm
60mm
203.2mm
50.8mm
32.6mm
2" (50mm)
38.
1mm
88.
1mm
508.4mm
558.4mm
77
1.5mm
377.8mm
90mm
For 152mm toe kick, door panel
height should be 51mm shorter
For 51mm toe kick, door panel height
should be 51mm longer
Summary of Contents for RS4621F
Page 2: ......
