50
Install fasteners
kit
Barbed plugs (2)
Cabinet depth
alignment gauges
(4)
Flange joiners (2)
Tools
Cross-head
screwdriver
Powered driver
(optional)
1/8" (3mm) Allen key
Add flange joiner
Remove alcove trims
Attach barbed plugs and depth alignment gauges
2
3
Left
Right
Place the alignment gauge by inserting
the screw head through the keyhole of
the gauge.
Push the alignment gauge down to lock
the position.
Tighten the screw just enough to firmly
hold the gauge.
z
The alignment gauges are only
temporary and must be removed
after installation.
Loosen the right and left screws at the
top and bottom sides of the door.
Locate the alignment gauges at correct
orientation to the right and left screws.
depth gauges
locations
1
Insert the barbed plugs into large holes
on the top right and left sides of both
appliances.
The plugs protect the inside surface
of cabinetry from being damaged by
screws when pushing in the appliance.
Remove bolts
from the locations
marked via the
green labels on your
appliance. Add the
flange joiners, and
tighten using a 1/8"
(3mm) Allen key to
secure.
Remove alcove trims
between adjacent
products.
barbed plugs
MULTIPLE INSTALLATION — APPLIANCE PREPARATION
Illustrations may differ from your purchased appliance.
Summary of Contents for RS1884F
Page 2: ......
