Problem
Possible causes
What to do
cabinetry.
High humidity
environment.
May occur during periods of high humidity. Wipe dry.
Drawer hard to open or
close. Tray or bin hard to
pull out.
Appliance may not be
level.
Refer to installation instructions.
Slides not extending fully.
Hold onto sides of drawer or tray, extend the slides fully
and evenly by using a firm pull on both sides. This will
reset the slides.
Food or packaging
trapped.
Move items in compartment so drawer can close
tightly.
Drawer not sealing or
closing properly.
Check that seal is sitting flat and sealing tightly.
When compartment is set to Freezer mode slides will
not move as freely as they will when set to the
Fridge modes due to low temperature.
Slides not extending fully.
Hold onto sides of drawer or tray, extend the slides fully
and evenly by using a firm pull on both sides. This will
reset the slides.
Drawer skin not sitting
flush with cabinetry.
Drawer skin not fitted or
adjusted correctly.
Adjust drawer skin. Refer to Installation instructions.
Storage compartment too
warm or too cold.
Temperature setting not
correct.
Refer to '
' section.
Frequent drawer openings
Minimize drawer openings to allow temperature to
stabilize.
Warm, humid weather.
Minimize drawer openings to allow temperature to
stabilize.
Updated: Thu, 27 Feb 2020 15:11:55 GMT
Powered by
3
