Fisher & Paykel OR60 models, Installation Instructions And User Manual, Page: 28 / 44

26
Care and cleaning
Burner parts and pan supports
You can remove and clean these parts with hot soapy water or non-abrasive detergents.
Clean spills regularly before they become burnt on. Do not wash these parts in a
dishwasher.
After cleaning, check that the burners and their flame spreaders are dry before replacing
correctly.
It is very important to check that the burner flame spreader and the cap have been
correctly positioned. Failure to do so can cause serious problems.
Note: to avoid damage to the electric ignition, do not try to light the cooktop when the
burners are not in place.
Replacing the burners
Check that:
The ignitor is always clean to ensure trouble-free sparking.
The probe is always clean to ensure correct operation of the safety valves.
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and
methylated spirits.
Fig. 22 Auxiliary and semi-rapid burner parts Fig. 23 Replacing the auxiliary and semi-rapid burners
Cap
Flame
spreader
Ignitor
Flame failure probe