Fig. 07
Fig. 09
Fig. 08
Fig. 10
STEP 2 Mounting Installation of Chassis
The lower rear corners of the cabinet need to provide proper support to the back of the Warming Drawer and the anti-tip
mounting clips. A 120 volt AC outlet should be located no further than 36 inches from the back right corner of the
Warming Drawer.
The bottom rear section of the cabinet should be made of solid plywood or two 2x4 beam. It holds the anti-tip mounting
clips and supports the weight of Warming Drawer, which is 90 lbs. (see Fig.11 and 12). If two 2 x 4 beams are used, the
distance between their centers must be 20” to be able to secure the Warming Drawer.
1. Use the screws provided and attach the mounting clips. They must be installed for anti-tip safety to the bottom
Updated: Sun, 14 Jun 2020 18:16:52 GMT
Powered by
4
