Fisher & Paykel OB90 Series, User Manual, Page: 44 / 52

42
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
General
The oven has reached
the set temperature
but the temperature
dial halo is still red
(indicating that the oven
is not ready to use). This is normal: when heating
up from cold, your oven is
designed to initially heat to a
temperature somewhat higher
than what you have set. This
is to provide optimal baking
conditions right from the start. Wait until a long tone sounds
and the temperature dial halo
turns white: the oven will
then be ready to use.
The oven is heating but
the display is dark.
The oven is set to ‘Display off’
option.
The oven is in Sabbath setting.
To quit the ‘Display off’
option, press and hold the
cancel
button until the
display shows the time of
day.
To quit Sabbath setting,
press and hold the cancel
button until the display
shows the time of day.
The oven cancels
automatic cooking when
I try to adjust the clock
setting. The oven was set for automatic
cooking when you were trying
to adjust the clock setting. You can only adjust the clock
setting while the oven is not
set for automatic cooking.
See section ‘Setting the clock
and first use’ for instructions.
The oven beeps
when I try to turn the
temperature dial OFF
or below a certain
temperature.
This is normal: for food safety
reasons, the oven functions
have factory-set minimum
temperature settings. The temperature dial itself
cannot be ‘turned off’.
Selecting Off with the
function dial will turn the
oven off.
The temperature dial
halo never turns white
when I use Grill. This is normal: the halo stays red to indicate that the grill
element provides instant radiant heat.
The rotisserie skewer
will not rotate.
The skewer did not fully
engage in the rotisserie drive.
The meat is too heavy.
Make sure the skewer
is pushed fully into the
rotisserie drive hole.
To get a finish similiar to a
rotisserie for pieces of meat
or poultry heavier than 6 kg,
use the grill tray and rack
and the Roast function.
The rotisserie skewer
stops rotating when I
open the door. This is normal: the rotisserie drive is disabled while the door is
open.