8
9
3
4
1
2
3
1
2
SECURE THE OVEN TO THE CABINETRY
Take care not to
damage the upper
trim of the oven or
the door sensor lever
1
Lift from both sides placing
hands under the oven chassis
2
Push oven in, ensuring you’re
not pushing on the vents or
control panel
3
Secure oven to cabinetry using
supplied scews
x4
Make sure the appliance is level and securely fitted to the cabinetry and the
oven door opens and closes freely.
Make sure all the internal packaging has been removed from the oven cavity.
Make sure all oven vents and openings are clear and are free of any
obstruction/damage.
Important!
Failure to make sure all oven vents are unobstructed may result in poor product performance.
Make sure that the isolating switch is accessible by the customer.
Turn the power to the oven on. The display should light up and show
0
:
00
.
Turn the oven function dial to ‘Bake’. Air should blow out of the vent at the top
of the oven. Inside the oven cavity, both oven lights should come on. After
five minutes, open the oven door: the air inside should feel warm.
Turn the oven function dial back to OFF.
TROUBLESHOOTING
If the appliance is not functioning correctly after installation, check the
following:
Check that the circuit breaker has not tripped or the fuse blown.
Make sure that the electrical connections have been correctly made.
Make sure that power is being supplied to the oven.
Make sure the voltage is correct across all phases.
If a problem occurs, consult the Troubleshooting section of the User Guide.
If after checking these points you still need assistance or parts, please refer to
the Service & Warranty book for warranty details and your nearest Authorised
Repairer, or contact us through our local website, listed below.
10
11
FINAL CHECKLIST
www.fi sherpaykel.com
F&P Italy Part No. 1103268-ß6 599790F NZ AU GB IE 06.13
REFIT THE DOOR
(1,1) -2- 599790F OB60&OB90 installA2 NZGB.indd 24/05/13 2:37 PM
(1,1) -2- 599790F OB60&OB90 installA2 NZGB.indd 24/05/13 2:37 PM