background image

1

IMPORTANT!  

 

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our 

website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

  IMPORTANT SAFETY INSTRUCTIONS

To avoid hazard, follow these 

instructions carefully before installing 

or using this appliance.

Please make this information available 

to the person installing the appliance - 

doing so could reduce your installation 

costs.

This appliance must be installed 

and connected to the mains power 

supply only by a suitably qualified 

person according to these installation 

instructions and in compliance with any 

applicable local building and electricity 

regulations. Failure to install the 

appliance correctly could invalidate any 

warranty or liability claims.

If the power supply cable is 

damaged, it must be replaced by the 

manufacturer, its service agent or 

similarly qualified person in order to 

avoid a hazard.

Isolating switch: make sure this 

oven is connected to a circuit which 

incorporates an isolating switch 

providing full disconnection from the 

power supply in accordance with the 

wiring rules.

The oven must be earthed.

Do not use adaptors, reducers or 

branching devices to connect the oven 

to the mains electricity supply, as they 

can cause overheating and burning.

 

 

1

   SAFETY AND WARNINGS

 WARNING!

Electrical shock hazard

Before carrying out any work on the 

electrical section of the appliance, it 

must be disconnected from the mains 

electricity supply.

Connection to a good earth wiring 

system is absolutely essential and

mandatory.

Alterations to the domestic wiring 

system must only be made by a 

qualified electrician.

Failure to follow this advice may 

result in electrical shock or death.

 WARNING!

Hot Surface Hazard

Take care - panel edges are sharp.

Failure to use caution could result in 

injury or cuts.

 WARNING!

Fire hazard

Do not use adapters, reducers, or 

branching devices to connect this 

appliance to the mains power supply.

Failure to follow this advice may 

result in overheating, burning, or fire.

!

!

!

Summary of Contents for OB60NC Series













Reviews: