manualshive.com logo in svg

Fisher & Paykel OB60 PYRO COMMERCIAL AA, Diagnostic Manual, Page: 13 / 23

Share
Download
Fisher & Paykel OB60 PYRO COMMERCIAL AA Diagnostic Manual Download Page 13

13

Menu 3 - Software Version

This menu will show the software version of the electronics. It will scroll through the 

User Interface (UI) and power board (Pb) software and will advise the following:

ww.xx.yy.zz

The individual identifiers describe:

ww: 

Safety version. Increments on approved changes to the safety critical software section. 

A change will result in a new checksum for the safety critical program code.

xx:

 Major functional software version. Increments on production releases that added major 

functionality such as support for new products.

yy:

 

Minor functional software version. Increments on all other production releases that or 

not classified as major.

zz:

 

Development version. Increments on internal releases.

 

MODEL ID 

NUMBER

MODEL/MARKET

0

No model ID set

11

OB60C COMPACT AA

12

OB60C MULTI AA

13

OB60C PYRO 9 FUNCTION AA

14

OB60 PYRO COMMERCIAL AA

15

OB60C PYRO COMMERCIAL GB/IE/EU

16

OB60C MULTI GB/IE/EU

17

OB60 PYRO GB/IE/EU

18

OB60C COMPACT GB

19

OB60C PYRO 11 FUNCTION SINGLE AA

Summary of Contents for OB60 PYRO COMMERCIAL AA
























Reviews:

No comments