Fisher & Paykel MINIMAL CID834DTB4 User Manual Download Page 29

CARE AND CLEANING

WHAT?

HOW?

IMPORTANT!

Everyday soiling

on glass

(fingerprints, marks, 

stains left by food or 

non-sugary spillovers 

on the glass)

Switch the power to the 
cooktop off at the wall.

Apply cooktop cleaner 
while the glass is still 
warm (but not hot)

Rinse and wipe dry with a 
clean cloth or paper towel.

Switch the power to 
the cooktop back on at 
the wall.

 

z

When the power to the 
cooktop is switched off, 
there will be no ‘hot 
surface’ indication but the 
cooking zone may still be 
hot! Take extreme care.

 

z

Heavy-duty scourers, some 
nylon scourers and harsh/
abrasive cleaning agents 
may scratch the glass. 
Always read the label to 
check if your cleaner or 
scourer is suitable.

 

z

Never leave cleaning 
residue on the cooktop: the 
glass may become stained.

Boilovers, melts, and 

hot sugary spills on 

the glass

Remove these immediately 
with a knife or scraper 
suitable for ceramic glass 
cooktops, but beware of 
hot cooking zone surfaces.

Switch the power to the 
cooktop off at the wall.

Hold the blade or utensil 
at a 30° angle and scrape 
the soiling or spill to a 
cool area of the cooktop.

Clean the soiling or spill 
up with a dish cloth or 
paper towel.

Follow steps 2 to 4 for 
‘Everyday soiling on 
glass’ above.

 

z

Remove stains left by 
melts and sugary food 
or spillovers as soon as 
possible. If left to cool 
on the glass, they may 
be difficult to remove or 
even permanently damage 
the glass surface.

 

z

Cut hazard: when the 
safety cover is retracted, 
the blade in a scraper 
is razor-sharp. Use with 
extreme care and always 
store safely and out of 
reach of children.

Spillover on the 

touch controls and 

stainless steel strip

Switch the power to the 
cooktop off at the wall.

Soak up the spill.

Wipe the touch control 
area with a clean damp 
sponge or cloth.

Wipe the area completely 
dry with a paper towel.

Switch the power to 
the cooktop back on 
at the wall.

 

z

The cooktop may beep 
and turn itself off, and the 
touch controls may not 
function while there is 
liquid on them. Make sure 
you wipe the touch control 
area dry before turning the 
cooktop back on.

29

Summary of Contents for MINIMAL CID834DTB4









































Reviews: