
21
EN
The Options
For example:
Standard rinse
Save Water rinse
Eco (Save Water++)
Spray + deep rinse
becomes Shower rinse (3-4 shower rinses)
becomes Eco Spray rinse
2 Deep rinses
1 Deep rinse
becomes Eco Spray rinse
ECO (SAVE WATER++)
uses an Eco Spray rinse, which cuts water use by a further 25%. If you
have low water pressure or sensitive skin use the
SAVE WATER
option only.
Neither of the Save Water options are designed to be used with fabric softener.
There are
some loads that may not suit being washed using the Save Water options. For instance, loads
that have a lot of sand or sawdust in them, or garments (which aren’t colorfast) are better rinsed
using a deep rinse.
4. Delay Start
Use
DELAY START
to delay the start of the wash cycle
between 15 minutes and 18 hours. Scroll the
OPTIONS
menu until
DELAY START
is shown. Use the
ADJUST
button to choose how long you want the machine to
delay for. Press
START/PAUSE
to begin the delay countdown.
Once the delay countdown has begun, it can be cancelled
by pressing
START/PAUSE
again.
Note: Be careful if using Delay Start for non-colorfast clothes
that are damp, or when using bleach, as dyes may run and
fabric damage may occur.
5. Save Time
SAVE TIME
allows you to shorten the wash cycle for lightly soiled clothes. Selecting this option
means the rinse, soak and spin times are all reduced. To save more time, decrease the soil level
using the
HOW DIRTY
button, this will reduce the wash time.
SAVE TIME
can be turned on or off
at any time during the cycle.
6. Soak
SOAK
provides a 2 hour soak in the middle of the wash phase and then completes the rest of
the cycle. During soak your washer will agitate for a few seconds every minute. Soak can be
shortened to one hour if
SAVE TIME
is selected.
7. Drip Dry
DRIP DRY
pauses the washer at the end of the rinse allowing you to remove drip-dry garments
before the wash goes into final spin. The washer will beep and display a message to tell you that
it is waiting for another instruction.
Press
START/PAUSE
to begin the spin.