17
INSTaLLaTION INSTRuCTIONS
3
Attach hood to wall
●
●
Open the front panel on the hood and remove the filter as shown in figures 4 – 6.
Fig.4
Fig.5
Fig.6
●
●
Hang hood off upper hood mounting screw with 2 mm gap. Hang off the keyhole
attachment points on the back of the hood (see Fig.7). Tighten screws.
Fig.7
●
●
Attach internal hood mounting screws to fix hood to wall. Use the 60 mm screws.
●
●
Reattach filter and close front panel.
4
Attach ducting
●
●
Attach ducting and vent outside
5
Attach chimney
●
●
Place chimney around the chassis, align the tabs with the slots and attach to the
chimney bracket.
●
●
Extend the upper chimney and attach to the upper chimney bracket with 10 mm
screws (if using upper chimney).
