background image

8

When you purchase any new Fisher & Paykel rangehood you automatically receive a two year 
Manufacturer’s Warranty covering parts and labour for servicing.

Fisher & Paykel undertakes to

Repair or, at its option, replace without cost to the owner either for material or labour any part of 
the Product, the serial number of which appears on the Product, which is found to be defective 
within TWO YEARS from the date of purchase.

This warranty DOES NOT Cover

A

   Service calls which are not related to any defect in the Product. The cost of a service call will be 

charged if the problem is not found to be a Product related fault. For example:
1. Correct the installation of the product.
2. Instruct you how to use the product.
3. Replace house fuses or correct house wiring.
4. Correcting fault(s) caused by the user.
5. Noise or vibration that is considered normal, eg. fan sounds, refrigeration noises or user 

warning beeps.

6. Correcting damage caused by pests, eg. rats, cockroaches etc.

B

   Defects caused by factors other than:

1. Normal domestic use or
2. Use in accordance with the Product’s User Guide.

C

   Defects to the Product caused by accident, neglect, misuse or ‘Act of God’.

D

   The cost of repairs carried out by non-authorised repairers or the cost of correcting such 

unauthorised repairs.

E

   Normal recommended maintenance as set out in the Product’s User Guide.

F

   Repairs when the appliance has been dismantled, repaired or serviced by other than a  

Fisher & Paykel AUTHORISED CUSTOMER SERVICE CENTRE or the selling dealer.

G

   Pick up and delivery.

H

   Transportation or travelling costs involved in the repair when the product is installed outside the 

Fisher & Paykel AUTHORISED CUSTOMER SERVICE CENTRE’S normal service area.

Service under this manufacturer’s warranty must be provided by an Authorised Service Agent 
(refer to the Customer care section for contact details). Such service shall be provided during 
normal business hours. This warranty certificate should be shown when making any claim.

Note:

This Warranty is an extra benefit and does not affect your legal rights and applies only to product 
purchased in New Zealand and Australia.

Please keep this User Guide in a safe place.
Do not return to Fisher & Paykel.

Manufacturer’s warranty

Summary of Contents for HS60CIW1













Reviews: