5
Installation options
Fig. 1 Free standing
115 mm
Fig. 2 Plinth height
Fig. 3 Upright wall
mounting
Minimum
lid clearance
M
in. clear
anc
e
for dr
yer = 860 mm
Fig. 4 Inverted wall mounting
Washer**
Compact = 435 mm
Medium = 475 mm
Large = 525 mm
Important!
The dryer must be installed in a suitable location.
Do not install the dryer behind a lockable door, sliding door, or
behind a door where the hinge is on the opposite side to that
of the dryer in such a way that the full opening of the door is
inhibited. Ensure the dryer door can always be opened fully.
There are several different ways you can install your dryer.
1. Free standing
The dryer stands on the floor and can easily be
moved into position.
2. Plinth*
Electronic auto-sense and
Rear-vented auto-timer models only
A plinth, with adjustable feet, allows the dryer to be:
– matched in height to your washer.
– installed under a bench.
Plinths can be purchased from your dealer.
115 mm Plinth
Part No. 94832
60 mm Plinth
Part No. 94852
3. Upright wall mounting*
All models
The wall mounting kit allows the dryer to be
installed at any desired height minimising the
amount of bending and stretching.
Wall Mounting Kit
Part No. 502067
4. Inverted wall mounting*
All models
A wall mounting kit and inverted panel allows you
to install the dryer above the washer or tub.
Electronic Inverted Panel (NZ/AU) Part No. 427901
Electronic Inverted Panel (SG/HK) Part No. 427885
Wall Mounting Kit
Part No. 502067
Low Ceiling Wall Mounting Kit
Part No. P6450
* Contact your dealer for assistance with plinths,
inversion kits and wall mounting kits. Note: some
additional parts/accessories are not available in
all countries.
** Washer sizes. Compact: 560 x 560 mm,
Medium: 600 x 600 mm, Large: 650 x 650 mm.
