manualshive.com logo in svg

Fisher & Paykel FabricSmart WA8060P, User Manual

Share
Download
Fisher & Paykel FabricSmart WA8060P User Manual Download Page 13

11

BEFORE YOU DO YOUR FIRST WASH

You owe it to yourself and your washer to have your washer installed correctly.

Before you start, it is a good idea to go through the following checklist:

1

  Has the base space packer been removed? Refer to page 6.

2

  Is the drain hose threaded through the ‘U bend’ (with no more than 20 mm extended) 

and hooked into your tub or standpipe? Refer to page 6.

3

  Is the hot hose connected to the Hot valve marked ‘H’? Is the cold hose connected to 

the Cold valve marked ‘C’? Refer to page 8.

4

  Is the washer correctly levelled, feet are extended and cabinet corners are clear of the 

floor? Refer to page 9.

5

  Have you performed the installation test cycle? Refer to page 10.

FabricSmart™ washer capacity

FabricSmart™ washer offers a generous 8 kg capacity. The list below outlines what is 
included in a 8 kg wash load (in accordance with AS/NZS 2040.1:2005).

WASH LOAD

8 kg

Sheets (double)

3

Bath towels

4

Tablecloths

3

Shirts

5

T-Shirts

5

Pillowcases

5

Shorts

5

Washcloths

8

Handkerchiefs

6

Note: the above load composition is indicative only. We recommend for everyday 
use that you separate out your sheets and towels and wash them separately on the 
‘Regular’ cycle.

Summary of Contents for FabricSmart WA8060P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands