24
CARE AND CLEANING
WHAT?
HOW?
IMPORTANT!
Oven
Cavity (enamel)
1
Remove the side racks and the
oven door for easier access
to the cavity. See instructions
after this cleaning chart for
removing the oven door.
2
Wipe the inside of the oven
using a household detergent
or an ammonia-based cleaner.
Alternatively, and especially if
the cavity is heavily soiled, use
an oven cleaner.
3
Wipe with a clean damp cloth
and allow to dry completely.
4
Refit the side racks as
indicated in the chapter ‘Using
the oven and warmer drawer’.
5
Refit the oven door.
●
●
To prevent soiling from
becoming ‘baked on’ and
stubborn, we recommend
removing any spills, food
or grease stains from the
enamelled surfaces after
each use.
●
●
To make cleaning the
oven ceiling easier, the
grill element can be
lowered. See illustrations
and instructions after this
cleaning chart.
●
●
If using ‘off the shelf’
oven cleaners, always
follow the manufacturer’s
instructions.
Oven door glass
1
Clean using a soft cloth with
a solution of mild detergent
or baking soda and hot water,
then wipe dry.
2
Wipe with a glass cleaner and
dry with a soft, lint-free cloth.
Don’t use oven cleaners or any
other harsh/abrasive cleaners,
cloths, scouring pads, steel
wool or sharp metal scrapers
to clean the glass surfaces.
These scratch the glass, which
in turn could result in the glass
cracking or shattering.
Oven shelves
●
●
Clean with a solution of mild
detergent and hot water.
●
●
Pre-soak burnt-on stains in a
solution of laundry powder
and hot water, then remove
with a dishwashing brush.
Oven lamp cover
1
Check that the cooker has
been disconnected from the
power supply and the lamp
cover is cool.
2
Remove the lamp cover
following the instructions in
‘Replacing the oven light bulb’.
3
Clean the lamp cover using
a household detergent or an
ammonia-based cleaner.
4
Wipe the glass cover with a
clean cloth and allow to dry
completely.
5
Replace the lamp cover,
ensuring that it clicks into
place.
●
●
Always replace the oven
lamp cover before using
the oven. Using the oven
without the oven lamp
cover will create a safety
hazard.
●
●
The notch in the inner
edge of the cover must be
on the side closer to the
oven floor. See ‘Replacing
the oven light bulb’ for
illustration.
