10
INSTALLATION INSTRUCTIONS
Installation
Your Fisher & Paykel refrigerator is fitted with front and rear rollers,
designed for moving the product in the forwards and backwards direction.
Avoid moving the product in a sideways direction as this may damage
the rollers or the floor covering/surface.
1
Your refrigerator will arrive with the front feet
wound up making moving the product into its
final location a simple task.
2
Roll the refrigerator into its final position
making sure there is the correct air gap
between the product and surrounding
cabinetry. See minimum clearance in cabinetry
dimensions table.
3
Adjust the front feet down until the
refrigerator is leaning backward with the front
approximately 10mm higher than the back.
This will ensure a good door closing action.
4
Aligning your refrigerator with cabinetry.
a
Align the sides of the refrigerator with
the cabinetry by adjusting the hinge side
front foot.
b
Adjust the handle side foot until it touches
the floor and takes a small amount
of weight.
c
Once the refrigerator is in place and
aligned with cupboards/alcove gently push
on the front top and check if the product
is rocking or stable.
Raise the front of
the refrigerator
Lower the front
of the refrigerator
Refrigerator feet